Madison Metal Baluster Black Finish

The Madison Metal Baluster has a Black Finish and offers a ‘double beaded’ design near the top and bottom of the baluster

How to go about Installing The Madison Metal Baluster:

• Installing the Madison Metal Baluster will need a handrail and baserail with a 13mm groove.
• Installing Madison Metal Spindle is best with a bracket.
• If you decide on buying a grooved handrail and baserail, you must do the following:
• Ensure the handrail and base rails come with a 13mm infill, and fit them into the groove like you would with wooden spindles.
• Buying rake brackets to aid installation means you will need an ungrooved handrail and baserail
• Purchase either rake brackets (MBRPB) or landing brackets (MBLPB) alongside the spindles depending on what you require.
• (Buying this baluster will NOT include Brackets, so please purchase those separately).

The Richard Burbidge Black Metal spindles are Available in 6 different designs.

The manufacturing of the Madison Metal Spindle consists of a robust 1.3mm mild steel box section. The manufacturers have coated the spindle with zinc phosphate, protecting it against corrosion. Finally, the coating is doubled with a black powder and a hammered finish.

If you will use this baluster for landings, that’s fine! Make sure you’ve bought the correct handrails and base rails & they are secured in place with adhesive.